1.Before turning on the power supply,please check if there's any loose for the parts of the machine,if yes,please use the corresponding tools.

2.Control machine operation

After turning on the power supply of the machine,be sure to idle for 5-10 minutes,in order to check whether the machine works normally.Frist time using the machine,Please try to control the running speed.Note:The motor is infinitely adjustable-speed motor,it can only adjusts the speed in operating condition,must not turn screw adjustment dial during shutdown.

3.After testing is completed,in the case of debug or production,each time at least need more than 2 kg of flour,water accounts for 30-32% of flour,such as 100 pounds of flour, 30 to 32 kg water,best to spraying water,can not put large amounts of water poured into the mixer one-time.Mixing time is best for 5-10 minutes,calender need at least three times:first:through the dough pressing machine,Press the thickness in 6-8 mm;it needs match with the roller of farfalle pasta making machine,if the roller width of farfalle pasta machine is 450mm,the width of dough pressing machine is also 450mm.

The second time:Press the thickness in 4-6mm

The third time:Press the thickness in 2-4mm

After pressing the dough for three times,the dough will be rectangular sheet,and it can overlap on the tray above for using,the sheet shoube be used as far as possible in 15 minutes.
 

Instruction:

It can produce beautiful Farfalle noodles. The machine can produce several size. We also have many capacity, such as: 20kg/h,30kg/h,35kg/h,40kg/h and 50-70kg/h machine. The farfalle noodles also has a range as follows: generally it's width can be 2cm,3cm and 4cm. Its length can be 4cm,5cm and 6cm.

The machine all is made of stainless steel. Can arrive the food demands. And the stainless steel material won’t be rusted even the machine add any water for a longer time. You also can add a flower feeder, then the machine can connect with others machine, it can be a whole production line. We also can design the appearance of the machine according to your demands, but only can change part.